|
|
Category L V Double Rod has 20 products: |
| To successfully install this Rod System you will require the following components:
A Transformer: The va rating of the transformer must not be less than the total wattage of the lamps used. Ideally they should be the same.
Rods: Available either straight or 90 degre angle for turning corners. You will also require rod connectors, again available either straight or adjustable angle. It is not recommended to have a run longer than 8m from one transformer. Longer runs can be achieved by joining two runs together using the isolation connectors.
Fixings: Rods must be suspended from the ceiling using the Ceiling Suspensions. There should be at least one Ceiling Suspension per 1m run. Rods are connected to the transformer by the Cable Feed In Set. Please note:
Items from different Rod Systems cannot be mixed
Rod Systems cannot be dimmed |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
