|
A word about efficiency...
There has always
been some confusion about how much light
you get from the different types of
light bulb and how much energy they
consume. The new breed of compact fluorescent
(or ‘low energy’) lamps will only use
around 11 watts of power to generate
the same light as a normal 60 watt light
bulb and they last up to eight times
longer. There is no doubt at all that
they save you money over the life of
the lamp. A halogen bulb uses about
half the energy of a conventional light
bulb to generate the same amount of
light. A recent breakthrough in technology
has resulted in the appearance of very
bright LED lights. These are very small
but relatively bright for their size
and have a life often in excess of 50,000
hours. They are yet to appear in any
number in domestic lighting but it is
only a matter of time.
Further Information
on Lightbulb types
Help choosing
the correct Dimmer Switch
GENERAL TIPS ON LIGHTING
YOUR HOME
Many people spend
a great deal of money decorating and
furnishing their homes to create an
atmosphere only to find that something
is missing. Good lighting will complement
and complete the effect you are seeking
but remember that bright lighting is
not always good lighting. A light source
creates a pool of light but there is
a second effect produced when this light
is reflected by surfaces. It is this
secondary effect which cannot be reproduced
in the shop where you buy your lights.
Consider where you are to put the light
and the surfaces under and around it.
What effect will the reflected
light have?
Avoid hard contrasts which
can be tiring to the eyes and, where
possible, try to combine different types
of lighting in the same room. Direct
lighting for reading or working, pools
of light to highlight features such
as paintings or objects and washes of
light on walls all help to add atmosphere
to a room whilst remaining functional.
If a room has to perform several functions,
consider installing a dimmer. This will
allow a higher light level for working
or reading and a lower light level for
relaxation. This can prove useful too
for older eyes which need more light.
Colour is most important,
incandescent bulbs help create a cosy
atmosphere in living areas while fluorescent
lamps give a cooler, more efficient
light for utility rooms. A room painted
in a dark colour will need more
light as much of it will be absorbed,
whilst lighter colours reflect light.
You can add colour to a room by illuminating
a coloured surface. Avoid glare by placing
the lights at a height which prevents
the eye from seeing the bulb directly.
Pendants should not be hung so high
that the
bulb is clearly visible underneath.
Take care that lights placed over reflective
surfaces such as glass tables have a
diffuser in them.
How much light?
Determining the correct light levels
for a home environment is a very complicated
subject and depends to a degree on the
individuals perception and requirements.
The formula below, however, can be used
as a rule of thumb.
Measure the room size in square metres
and multiply this by 25 (for incandescent
lamps) 15 (for halogen lamps) or 19
(if using compact fluorescent lamps).
This will give you the total watts required
to light the room.
Example 1: a room 5m
x 5m has an area of 25sq metres. If
we are to use conventional incandescent
lamps we multiply this by 25 giving
a total wattage of 625 watts. This can
be made up as required, for example
as follows:
2x 75w table lamps =150w
2x 3 light ceiling lights each with
40W bulbs =240w
2x double wall lights each with 40W
bulbs =160w
2x single wall lights each with 40W
bulbs = 80w
TOTAL =630w
Example 2: a kitchen
3m x 6m = 18 square metres. If we intend
to use low voltage halogen dichroic
lamps then we multiply this by 15 to
arrive at 270watts required in total.
This can be made up as follows:
1x 3 light halogen bar fitting with
adjustable heads each with 50W lamps
=150w
6x downlighters mounted in the ceiling
each with 20W dichroic lamps =120w
TOTAL =270w
Please note that this formula is a guide
only and some people prefer more light,
others less. A useful measure is to
over estimate by 10-15% and install
a dimmer to give you more control. If
in doubt seek professional advice.
ROOM BY ROOM
Different rooms have
different functions, accordingly each
room will have a different lighting
requirement. Please click on the following
links to help you decide which light
sources you need for each room in your
house...
Living Room, Dining
Room, Kitchen
Bathroom
Bedroom, Study,
Children's Room
|