Techmar Additional Receiver For Remote Control for Plug and Play Lighting

The Plug 'n' Play garden lights can be controlled remotely, or used with a Dusk to Dawn photocell to light up your garden automatically during the hours of darkness.

Photocell with Timer

Use the timer/sensor unit to switch your lights on and off automatically significantly improving the security around your premises. The photocell will light automatically at dusk and can be set to turn off automatically at dawn or after a set number of hours (1-9) manually selected.

Plug and Play connection; simply connect into lighting circuit before the lights to be controlled. Timer / sensor unit will automatically control all lights following it in the circuit to the end of the circuit (to a max of 150W) or the next timer/sensor switch

Remote Control and Receiver

Each remote control is supplied with 1 receiver. Simply plug in the receiver between the transformer and the first light and the remote control will operate all the lights from the receiver to the end of the circuit (to a max of 150W) or to the next receiver.

The remote control will operate up to 9 groups of lights, from a maximum of 40M. Where you have more than 1 group of lights, an additional receiver will be needed for each group.