Lighting Direct, Low Cost Lighting Direct to Your Door

Lighting-Direct • Track & Wire Lighting • L V Wire System

To successfully install this wire system you will require the following components:
A Transformer: The va rating of the transformer must not be less than the total wattage of the lamps used. Ideally they should be the same.
Cable: You must allow for twice the distance you wish to cover plus an extra metre just to be sure. It is not recommended to have a run longer than 8m
Fixings:  The transformer has to be mounted remotely from the cable span. One pair of tensioners is required at one end with a pair of wall fixings at the other end. You would then require a pair of power feeds and extra cable to connect the transformer to the run. It is possible to change direction of the run by using a pair of ceiling deflectors mounted on the ceiling.

Please note:
Items from different Wire Systems cannot be mixed
Wire Systems cannot be dimmed

View suggested Wire System set up